BLACKMER

Compressors SERIES HD610

BLACKMER HD Series - Compressors for many industrial applications with a large number of industrial gases

 

BLACKMER Industrial Compressors Series HD610

  • BLACKMER HD612 & BLACKMER HDL612
  • BLACKMER HD613 & BLACKMER HDL613

Available in air-cooled and liquid-cooled models, the Blackmer HD610 Series two-stage reciprocating gas compressors feature flow rates of 53.7 CFM (91.2 m³/hr) at max rpm. The HD610 Series gas compressors have four models available, the air-cooled (HD612/613), and liquid-cooled (HDL612/613) models. For precise leakage control and to minimize product contamination, the HD610 Series gas compressors offer double- (HD612/HDL612), or triple-seal (HD613/HDL613) models. All HD Series Compressors are equipped with thick and robust wear parts – piston rings, needle bearings, and high-efficiency valves that will keep the HD Series compressors operating long between maintenance cycles. Equipped with an array of features such as a ductile iron head and cylinders, steel pistons and self-adjusting piston rod seals, HD compressors provide maximum performance, energy efficiency, quiet operation, low maintenance cost and reliability under the most severe service conditions.

Features and Benefits

Two-stage models with piston displacements to 53 cfm (91 m3/hr) and working pressures up to 415 psi (28 bar) for use on higher compression ratio requirements
Available in air-cooled or liquid-cooled models
Available with double- and triple-seal models, providing positive sealing under all operating conditions with materials to suit any application
Triple-seal models are well suited for handling toxic, hazardous or corrosive gases

Applications:

  • Vapor recovery
  • Gas gathering
  • Gas transfer
  • Gas evacuation
  • Enhanced recovery
  • Gas blanketing
  • Pressure boosting
  • Flare elimination
  • Leak test recovery
  • Liquid gas transfer

Common Industrial Gases:

  • Ammonia
  • Argon
  • Butadiene
  • Butane
  • Carbon Dioxide
  • Chlorine
  • Ethane
  • Ethyl Alcohol
  • Helium
  • Hydrogen
  • Hydrogen Chloride
  • Isobutene
  • Methyl Chloride
  • Nitrogen
  • Nitrous Oxide
  • Propylene
  • Refrigerants
  • Sulfur Dioxide
  • Vinyl Chloride

Technical Data BLACKMER HD610 Series

  • Inlet - Outlet: 2.00*/1.50*
  • Cylinder: 2
  • Flow rate: 91,2 m3/h
  • Inlet pressure (Min.): 0,21 bar
  • Outlet pressure (Max.): 28,6 bar